Console> (enable) show config all
begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Sun Oct 21 2001, 21:36:49
!
#version 6.2(2)
!
set passWord $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set enablepass $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set prompt Console>
set length 24 default
set logout 20
set config mode binary
set banner motd ^C^C
!
#test
set test diaglevel minimal
!
#errordetection
set errordetection inband disable
set errordetection memory disable
set errordetection portcounter enable
!
#system
set system baud 9600
set system modem disable
set system name
set system location
set system contact
set system countrycode
set traffic monitor 100
set system highavailability disable
set system highavailability versioning disable
set system core-dump disable
set system core-file slot0:crashinfo
set feature log-command enable
set feature supmon enable
!
#power
set power redundancy enable
!
#frame distribution method
set port channel all distribution ip both
!
#mac address redUCtion
set spantree macreduction disable
!
#default portcost mode
set spantree defaultcostmode short
!
#snmp
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp rmonmemory 85
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
!
#tacacs
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs timeout 5
!
#radius
set radius deadtime 0
set radius timeout 5
set radius retransmit 2
!
#kerberos
!
#authentication
set authentication login tacacs disable console
set authentication login tacacs disable telnet
set authentication login tacacs disable http
set authentication enable tacacs disable console
set authentication enable tacacs disable telnet
set authentication enable tacacs disable http
set authentication login radius disable console
set authentication login radius disable telnet
set authentication login radius disable http
set authentication enable radius disable console
set authentication enable radius disable telnet
set authentication enable radius disable http
set authentication login local enable console
set authentication login local enable telnet
set authentication login local enable http
set authentication enable local enable console
set authentication enable local enable telnet
set authentication enable local enable http
set authentication login kerberos disable console
set authentication login kerberos disable telnet
set authentication login kerberos disable http
set authentication enable kerberos disable console
set authentication enable kerberos disable telnet
set authentication enable kerberos disable http
set authentication login attempt 3 console
set authentication login attempt 3 telnet
set authentication login lockout 0 console
set authentication login lockout 0 telnet
set authentication enable attempt 3 console
set authentication enable attempt 3 telnet
推荐阅读
- 当接入路由器做NAT时如何做限速
- 6509基本配置口令
- OSPF连载:全面了解DR的概念
- 简单介绍 路由器NAT问题
- 关于疫情的感想 关于疫情的感想示例
- Native IOS 65xx系列交换机配置(上)
- Cisco 6509交换机双引擎热备配置
- 经验与技巧:IP多层交换示例配置
- Native IOS 65xx系列交换机配置(下)
- 如何在路由器上做NAT