Contents
Description
Step-by-Step Procedure
Related Information
--------------------------------------------------------------------------------
Description
This document describes how to recover a passWord on a Cisco Catalyst 1800.
Step-by-Step Procedure
1.Locate the two small black buttons mounted side by side on the red holding device inside the left cover of the switch.
The button located nearest the front of the switch is the NMI button.
【1800 Cisco交换机口令的恢复】2.Boot the router.
3.At the prompt for the password, press the NMI button five times.
The switch reloads and the password resets to its default value of "public."
推荐阅读
- 接口关闭举例
- 理解命令模式
- Cisco3640Voip配置实例解析
- CiscoRouter之间CallBack典型配置
- CISCO学习问题之ipforward-protocol命令的用法
- Cisco2610路由器10M端口做Trunk
- 显示ciscoIOStype-7密码
- CISCO学习问题之howtoaccessrouterwhentheconsoleisbrok
- 升级updatecisco3524XL经验全集!
- CiscoRouter的若干常见问题