云南龙网

  1. 首页 > 云知道 > >

彻底解决8139网卡安装完驱动后不认的问题

云知道

首先要用jsn老兄的方法把你的/etc/hostname.rtls0 以及hosts、/etc/netmasks、/etc/netmasks、/etc/nsswitch.conf设置好 。

然后注意看8139驱动的说明

Install method
a. Power-off your PC and insert your RTL8139 adapter.
b. Boot-up you Solaris/x86 and login as "root".
c. Copy the "rtls099.zip" into the temporary location in your hard-driver.
d. UNZIP the "rtls099.zip" and you will get 2 files, "rtls" and "Install".
e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139 or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example, modify the "pci1186,1301" to "pciABCD,WXYZ".
f. Run the "Install" from File Manager to install the driver, and
it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
g. You need to create the "/etc/hostname.rtls0" file and modify some
other related files to make your networking environments working well.
h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that
Solaris will reboot and scan changed
hardware environment.
i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.

其实这句英文我只有
e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139 or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example, modify the "pci1186,1301" to "pciABCD,WXYZ".
f. Run the "Install" from File Manager to install the driver, and
it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
这里一开始没看明白我以为没什么用处 。但是我大错特错了；（因为这里太重要了 。
从F.可以知道，安装这个驱动他们会设置/etc/name_to_major和/etc/driver_aliases两个文件 。当我们安装完后，需要把/etc/driver_aliases里的
rtls "pci1186,1301"
rtls "pci10ec,8139"
rtls "pci1113,1211"

设置为
#rtls "pci1186,1301"
rtls "pci10ec,8139"
#rtls "pci1113,1211"
然后重起
如果还不好使还有Install里的


# update
＃ /etc/driver_aliases
＃ /etc/name_to_major

这个＃去掉 。肯定能好使：）

good luck！

    推荐阅读


    上一篇：什么动物吃草树木枝叶树皮

    下一篇：菠萝蜜表皮发黑发软是坏了吗