云南龙网

  1. 首页 > 云知道 > >

Solaris 10安装命令sys-uncofig用法介绍

云知道

以root用户登录Solaris后，在命令行提示符下输入# sys-unconfig
回车，屏幕上出现如下提示WARNING
This program will unconfigure your system.　It will cause it
to revert to a "blank" system - it will not have a name or know
about other systems or networks.
This program will also halt the system.
Do you want to continue (y/n) ?
输入y，系统将重启 。重新启动Solaris后，将提示对系统重新进行设 置，包括缺省语言、X Server、网络、时间等的设置 。
(1) 语言选择 。选择1，简体中文 。回车，进入下一步
Select a Language
0.English
1.SimplifIEd Chinese
Please make a choice (0 - 1),or press h or ? for help:(2) 字符集选择 。选择2 。回车，进入下一步
Select a Locale
0.Simplified Chinese EUC
1.Simplified Chinese EUC
2.Simplified Chinese GB18030
3.Simplified Chinese GBK
4.Simplified Chinese GBK
5.Simplified Chinese UFT-8
6.Simplified Chinese UFT-8
7.Go Back to Previous Screen
Please make a choice (0 - 7),or press h or ? for help:(3) X Server选择 。通过上下键将光标移到Xorg server，回车选中 。F2，进入下一步
kdmconfig - Introduction and X Server Selection
X Server Selection
----------------------
[X] Xorg server
[ ] Xsun server
F2_Continue F3_Exit　F6_Help(4) 网卡设置 。系统自动找到网卡 。以下步骤中，网卡名以****代表 。回车，进入下一步
Configuring network interface addresses: ****(回车)
ipw0(回车)(4.1) 网络连接设置 。选择Yes 。F2，进入下一步
Network Connectivity
Networked
-----------
[X] Yes
[ ] No
F2_Continue F6_Help(4.2) 如果有多块网卡，进行网卡选择 。F2，进入下一步
Configure Multiple Network Interfaces
Network interfaces
--------------------
[X] iprb0
[ ] ipw0
F2_Continue F6_Help(4.3) 是否使用DHCP 。选择No，进入下一步
【Solaris 10安装命令sys-uncofig用法介绍】DHCP for ****
Use DHCP for ****
-----------
[ ] Yes
[X] No
F2_Continue F6_Help(4.4) 设置网卡的主机名 。输入自定义的主机名 。F2，进入下一步
Host Name for ****
Host name for **** __________________
F2_Continue F6_Help(4.5) 设置IP地址 。输入IP地址 。F2，进入下一步
IP Address for ****
IP Address for **** __________________
F2_Continue F6_Help(4.6) 设置子网 。选择Yes 。F2，进入下一步
Subnet for ****
System part of a subnet
-----------
[X] Yes
[ ] No
F2_Continue F6_Help(4.7) 子网掩码设置 。输入子网掩码，缺省255.255.255.0 。F2，进入下一步
Netmask for ****
Netmask for **** __________________
F2_Continue F6_Help(4.8) 是否支持IPv6 。缺省No 。F2，进入下一步
IPv6 for ****
Enable IPv6 for ****
-----------
[ ] Yes
[X] No
F2_Continue F6_Help(5) 对以上设置进行确认 。F2，进入下一步；F4对前面的设置进行修改
Confirm Information for ****
F2_Continue F4_ChangeF6_Help
Configuring parameters , 25 seconds left to complete(6) Kerberos安全设置 。缺省No 。F2，进入下一步
Configure Security Policy:
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard Unix security
Configure Kerberos Security
--------------------------------
[ ] Yes
[X] No
Confirm Information
F2_Continue F4_ChangeF6_Help(7) 名字服务 。选择None 。F2，进入下一步
Name Service
Name service
----------------
[ ] NIS
[ ] NIS
[ ] DNS
[ ] LDAP
[X] None
F2_Continue F6_Help(8) 名字服务确认 。F2，进入下一步

推荐阅读


上一篇：冢是多音字吗

下一篇：八吉祥语