【交换机配置IP访问控制列表 Cisco6509】本文讲解了在交换机中是如何配置IP访问控制列表的
Console> (enable) set ip permit enable
IP permit list enabled.
Console> (enable) set ip permit 172.16.0.0 255.255.0.0 telnet
172.16.0.0 with mask 255.255.0.0 added to telnet permit list.
Console> (enable) set ip permit 172.20.52.32 255.255.255.224 snmp
172.20.52.32 with mask 255.255.255.224 added to snmp permit list.
Console> (enable) set ip permit 172.20.52.3 all
172.20.52.3 added to IP permit list.
Console> (enable) show ip permit
Telnet permit list feature enabled.
Snmp permit list feature enabled.
Permit List Mask Access Type
---------------- ---------------- -------------
172.16.0.0 255.255.0.0 telnet
172.20.52.3 snmp telnet
172.20.52.32 255.255.255.224 snmp
Denied IP Address Last Accessed Time Type Telnet Count SNMP Count
----------------- ------------------ ------ ------------ ----------
172.100.101.104 01/20/97,07:45:20 SNMP 14 1430
172.187.206.222 01/21/97,14:23:05 Telnet 7 236
Console> (enable)
Console> (enable) set ip permit disable all
Console> (enable) clear ip permit 172.100.101.102
172.100.101.102 cleared from IP permit list.
Console> (enable) clear ip permit 172.160.161.0 255.255.192.0 snmp
172.160.128.0 with mask 255.255.192.0 cleared from snmp permit list.
Console> (enable) clear ip permit 172.100.101.102 telnet
172.100.101.102 cleared from telnet permit list.
Console> (enable) clear ip permit all
IP permit list cleared.
Console> (enable)
交换机配置
;
推荐阅读
- 中文 Cisco4006交换机简明配置手册
- 千兆交换机选购之“先”人指路
- 玩转交换机的“TRUNK”
- 博达交换机VLAN隔离配置[S3224]
- 为交换机使用中的疑难杂症把脉
- 上 以太网交换机的堆叠与级联基础
- 魅蓝note详细的基本配置介绍
- 思科交换机常用命令
- 直通线连接UP-Link端口,导致交换机之间无法通讯
- 思科华为几种主流交换机的镜像配置方法